| |
 |
Motherboards  Xeon Boards [ X7DWE ] |
|
ATX, 4 (x8) PCI-E 2.0, SATA Xeon
Quad-Core/Dual-Core 5400 (Seaburg) ServerBoard
|
Key Features
1. Dual Intel®64-bit Xeon®Quad-Core or
Dual-Core,
1600 / 1333MHz FSB
2. Intel®5400 (Seaburg) Chipset
3. Up to 32GB DDR2 800* / 667 SDRAM Fully Buffered DIMM (FB-DIMM)
4. Intel® 82563EB Dual-port
Gigabit Ethernet Controller w/ IOAT
5. 6x SATA 3.0Gbps Ports 6. 4 (x8) PCI-Express Gen 2.0),
1 (x4) PCI-Express (Using x8 slot),
1x 64-bit 133MHz PCI-X,
1 UIO slots 7. XGI Z9S Graphics with
32MB video memory
8. IPMI 2.0 (SIMSO) Slot
|
|
|
|
 |
|
 |
| MBD-X7DWE
-O |
- X7DWE
(Standard Retail Pack)
|
| MBD-X7DWE
-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 13.05" x 13.68" (33.1cm x 34.7cm)
|
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel®64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV
sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
- 1600 / 1333 / 1066 MHz system bus
|
| |
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 32 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
| Memory Type |
- 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 512 MB, 1GB, 2GB, 4GB , 8GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel®x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel®5400 (Seaburg) chipset
- MCH + ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
|
| Network Controllers |
- Intel®82575 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel®I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- XGI Z9S Graphics with
32MB video memory
|
| Super I/O |
|
| |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2 rear + 1 Type A connector + 2 headers (4 Ports)
- Total 7 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Serial header
|
|
|
| |
|
| PCI-Express |
- 4 (x8) PCI-e slots ( Gen 2.0)
- 1 (x4) PCI-e slot (Using x8 slot)
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slots
|
| UIO |
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix®BIOS
- EFI BIOS Support
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ¡À12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
RoHS
|
RoHS Compliant 6/6, Pb Free |
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
