|
|
|
PolyServer 5000P8
(8-way)
(5000P=5000P Chipset,8= 8 DIMM)
Dual Intel QuadCore Xeon
32 GB DDR2, 6 Hot-swap SATA2
|
4U Rackmountable / Tower
|
|
|
| Recommended Configurations |
|
|
|
|
 |
| Specifications |
|
|
|
| Motherboard |
- Tower / 4U chassis support for max. motherboard size - 12" x 13" E-ATX
|
| Processor |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel® Xeon® Processor 5000/5100/5300 with 2/4/8MB L2 Integrated Advanced Transfer Cache.
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| Memory |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDRII ECC Fully Buffered DIMM
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Network |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Expansion Slots |
- 7x low-profile full-length expansion slots
|
| Drive Bays |
- 6 Hot-swap ATA/SATA drive trays
|
| Front Panel |
(Buttons)
- Power On/Off button
- System Reset button
(LEDs)
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Power Fail LED
- Power Fail LED
( Ports )
|
| Chassis |
| 2U |
- 2012AIS (12 x SCSI, PATA-SATA, SATA , 1 x 2.5" HDD)
- 2118SAS (8 x Swap SAS, SATA or SCSI + Slim CD/FDD Bays )
|
| 3U |
- 3116AIS (16 x SATA,PATA,P/SATA,or SCSI,2 x HDD Bays )
- 3116SAS (16 x Swap SAS, SATA or SCSI + Slim CD/FDD Bays )
|
| 6U |
- 6136BW (36xSATA2/Multilane/SCSI, 2 rear 5.25" Bays)
|
|
Power Supply |
- 760W Triple-Redundant AC power supply with PFC
|
System Cooling |
- 4 chassis cooling fans, 2 exhaust fans and 1 fan shroud
|
| Dimensions |
- Height:7.0" (177mm)
- Width:17.2" (437mm)
- Depth:25.5" (647mm)
- 69.5 lbs (31.5kg)
- Available Color:Beige, Black
|
| Optional features
|
- Support for Intelligent Platform Management Interface v.2.0
- Optional Rackmount Kit
|
|
|
| Motherboard Features |
|
|
|
| |
 |
- Xeon Dual-Core Blackford ServerBoard
- 12" x 13.05" (30.5cm x 33.2cm)
|
|
| 1. |
Dual Intel® 64-bit Xeon Support, 667 / 1066 / 1333MHz FSB |
| 2. |
Intel® 5000P (Blackford) Chipset |
| 3. |
Up to 32GB DDRII 667 & 533 SDRAM Fully Buffered DIMM |
| 4. |
Intel® 82563EB Dual-port Gigabit Ethernet Controller |
| 5. |
6x SATA2 Ports via ESB2 Controller SATA Controller |
| 6. |
2 (x8) & 1 (x4) PCI-Express,
2x 64-bit 133MHz PCI-X,
1x 64-bit 100MHz PCI-X |
| 7. |
ATI ES1000 Graphics with
16MB video memory |
| 8. |
SIMLP IPMI 2.0 |
|
|
| On-Board Devices |
| Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
|
| SATA |
- Intel ESB2 SATA2 Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
|
| Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
|
| Input / Output |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
- 1 ECP / EEP parallel port
|
|
|
|
