|
Suma
3016 Series
|
SCSI-U320 or Fibre Host to SATA or SCSI Drive
RAID
Up to 8TB Storage per 3U Rack, Starts at
$6999
|
|
 |
Features
Highlight |
|
|
|
 |
Highest storage density with 16 x 250G to 500G
SATA-II, 300G IDE or 36G to 146G U320 or U160 SCSI/Fibre drives
in 3U space |
 |
Full featured RAID functionality, supporting
RAID levels 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID, and JBOD |
 |
Single or Redundant Controller Supported |
 |
Two 2Gbps Fibre Host channels or Two Ultra320/160
SCSI Host channels (supports Cluster) |
 |
Multiple array configurations with different RAID
levels, optimized on a per array basis. |
 |
Auto detection, auto rebuild, hot spare, and hot-swap
capability |
 |
Support up to 1024 LUNs for host mapping |
 |
Intelligent Drive Handling - for managing bad
blocks during rebuild and the manual Media Scan function for
data protection. |
 |
RAIDWatch - Browser-based GUI manager on all major
platforms (requires Java plug-in) |
 |
RAIDWatch - GUI Manager for Windows, Linux, Solaris
(SPARC,x86), AIX, Text mode for all other platforms |
|
 |
Specifications |
|
|
 |
64-bit Embedded Hardware RAID Processor |
 |
Proprietary ASIC 266 with XOR engine and
ECC support |
 |
Standard 128MB - 2GB DDR with optional battery |
 |
Controller board voltage and temperature
self-monitoring |
 |
RS-232C serial interfaces, one for text
mode management, and the other UPS support. |
 |
One 10/100 Ethernet for local and remote
GUI management |
 |
Immediate array availability |
 |
Hot-spare support with preset schemes
against SMART detected errors |
 |
Drive hot-swap and automatic background
rebuild |
 |
Online expansion by adding drives
or replacing drives with drives or larger capacity. |
 |
Intelligent Drive Handling:
1) Data block verification and repair
2) Skipping non-repairable blocks to continue
rebuild |
 |
Two 2Gbps Fibre channels SAN ready,
supporting FC-AL, point-point, and switched fabric. |
 |
Two Ultra320 SCSI channels (Optional
2 additional external Drive Channel for JBOX) |
 |
Firmware-embedded manager via RS-232C
(platform-independent) |
 |
Firmware-embedded Java-based GUI RAID
manager over in-band SCSI or Ethernet featuring
global manageability; real-time event notification
and monitoring. |
 |
Powerful NPC (Notification Processing
Center) module for event notification over Email,
LAN broadcast, SNMP traps, etc. |
 |
Support SNMP v2.0 MIBs with get and
set function |
 |
Dual channel SFP optical Fibre or
|
 |
Two mini SCSI ports for Host (2 optional
ports for external JBOX) |
 |
Two audio jack for RS-232C serial
ports (38400, n, 8, 1) |
 |
One RJ-45 Ethernet port |
 |
Auto-shutdown when environmental thresholds
exceeded |
 |
Power supply: 2 redundant hot-swappable
power with PFC
Input: 90~260VAC, 47-63Hz
Output: @5V (25A max), 12V (32A max), 3.3V
(20A max) |
 |
Operating temperature: 0 to 40C |
 |
Relative humidity: 5-95%,
non-condensing |
 |
Altitude: Sea level to
10,000 ft |
 |
131H (3U) x 446.2W (19") x 500D
(19.7") mm (3U rackmount configuration - 19"
equipment cabinet size) |
|
|
|
|